Pure water filling machine work flow

1. Working process:
The bottle is passed through the air duct, and then sent to the bottle rinser of the three-in-one machine through the bottle-removing star wheel. A bottle clamp is installed on the rotary table of the bottle rinser, and the bottle clamp clamps the bottle mouth and turns 180° along a guide rail to make the bottle mouth downward. In a specific area of ​​the rinser, rinse water is sprayed from the nozzle of the rinse clamp to rinse the inner wall of the bottle. After the bottle is rinsed and drained, it is then turned 180° along the guide rail under the bottle clamp to make the bottle mouth upward. The cleaned bottles are led out by the bottle rinser and sent to the filling machine through the bottle-spinning star wheel. The bottle entering the filling machine is clamped by the neck plate, and the bottle is lifted up under the action of the cam, and then the filling valve is pushed up by the bottle mouth. Filling adopts gravity filling method. After the filling valve is opened, the material passes through the pure water filling machine valve to complete the filling process. After the filling is completed, the bottle mouth drops and leaves the filling valve, and the bottle enters the capping machine through the neck transition dial. The anti-rotation knife on the capping machine catches the neck of the bottle, keeping the bottle upright and preventing rotation. The capping head keeps revolving and rotates on the capping machine, and under the action of the cam, the capping, capping, capping, and capping actions are realized to complete the entire capping process. The finished bottle is conveyed from the capping machine to the bottle conveying chain through the bottle output dial, and the three-in-one machine is conveyed by the conveying chain.